Snow
Plows |
 |
click on image for
close-up | NEW
8' Pro-Tech SSP8 Sno-Pusher -
c/w to fit skid-steer loader or Bobcat
|
click on image for
close-up | NEW
12' Pro-Tech BSP12 Sno-Pusher -
c/w to fit loader backhoe
|
click on image for
close-up | Folding
Vee Snow Plows -
Mounted on a loader or grader, it's one of the most efficient front plow for breaking,
lifting and throwing crusted snow.
- Extra
heavy duty design and construction:
- 3/26"
high tensile steel moldboard
- to the adjustable 3/16"
structural tube running gear assemblies.
|
click on image for
close-up | Heavy
Duty Patrol Wings -
All moldboard structural parts manufactured from 50,000 PSI high tensile steel.
- Wing
post assembly and structural cross tubes provide secure attachment to truck chassis.
- Mechanical
link and cable assembly minimize shock loads by allowing moldboard to float 60"
outboard and 18" inboard.
- Telescoping,
spring-cushioned, adjustable pushbar absorbs moldboard shock loads up to safety
pin limit of 7,000 lbs.
-
Entire wing assembly easily removable during off season.
-
Torsion trip edge recommended for residential streets.
- Customized
mounting packages available.
|
click on image for
close-up | Snow
Plow & Wing Combination - 18'
cutting path in one pass.
- Quick
coupling of booth plow and wing on same structural coupler.
-
Independent operation of plow and wing permits clear plowing when road and shoulder
are at different elevations.
-
Operator line of sight includes both plow and wing for proper clearance and safety.
|
click on image for
close-up | Industrial
Snow Plows - Box
reinforced 1/4" rolled plate moldboard with 3/4
x 6 x 4" bottom angle.
-
High tensile multiple reinforced 1/2" pushframe.
-
3/4"
bearing plates & 3/4" back plate on structural A-Frame.
-
2 1/2" solid steel pivot pin with lubricated bushing.
-
Dual 4 1/2 x 11" double acting hydraulic cylinders.
|
 |
Tripping/Reversing
Snow Plows - Dual
compression spring trip provides safety for driver and equipment.
- Moldboards
30" H x 10' W give 104" cutting path at 30 degress)
- All
moldboards 3/16" rolled plate steel, with tapered 1/2
x 4" plasma cut ribs, and 4 x 4 x 5/8"
reinforced
bottom angle. - Heavy
duty circle pushframe, 3 1/2 x 3 1/2
x 1/2" rolled angle welded to 4 x 4 x 3/8M"
structural tube Pushbeam.
- A-frame
of 4" S&C channel, welded to 1 x 5" backplate, reinforced with 5/8 x 3 1/2" top
plate.
- Heavy
duty swivel plate, 7" S&C channel with 1 1/4" grade 5 bolt in reinforced swivel
mechanism, and 1" plasma cut ears.
- Dual
redundancy hydraulic reversing system, with two 3 x 10" double acting cylinders.
- Designed
for specific pin hitch or coupler.
|
click on image for
close-up | Airport
Reversible Snow Plows -
Moldboard lengths from 14' to 26' in 2' increments.
- All
moldboards 3/16" rolled plate steel, with tapered 1/2 x 4" Plasma cut ribs.
- Heavy
duty welded, reinforced, structural pushframes.
- Variety
of running gear, hitches & accessories.
|
click on image for
close-up | Airport
Ramp Buckets -
Moldboard lengths from 14' to 26' in 2' increments.
- All
moldboards 3/16" rolled plate steel, with tapered 1/2 x 4" Plasma cut ribs.
- Heavy
duty welded, reinforced, structural pushframes.
- Variety
of running gear, hitches & accessories.
|
|
